蓝牙：MAP Shell
本文档介绍如何运行蓝牙经典 MAP（消息访问配置文件）shell 功能。 map 命令提供蓝牙经典 MAP shell 命令。
命令
主命令
map 命令：
uart:~$ map
map - Bluetooth MAP shell commands
Subcommands:
add_header : Adding header sets
mce : MCE commands
mse : MSE commands
MCE 命令
map mce 命令：
uart:~$ map mce
mce - MCE commands
Subcommands:
mas : MCE MAS commands
mns : MCE MNS commands
MCE MAS 命令
map mce mas 命令：
uart:~$ map mce mas
mas - MCE MAS commands
Subcommands:
discover : [none]
select : <instance_id>
rfcomm_connect : <channel> <instance_id> [supported_features]
rfcomm_disconnect : [none]
l2cap_connect : <psm> <instance_id> [supported_features]
l2cap_disconnect : [none]
connect : [none]
disconnect : [none]
abort : [none]
set_folder : <path: "/" | ".." | "../folder" | "folder">
set_ntf_reg : [none]
get_folder_listing : [srmp]
get_msg_listing : [name <folder_name>] [srmp]
get_msg : <msg_handle> [srmp]
set_msg_status : <msg_handle>
push_msg : [folder_name]
update_inbox : [none]
get_mas_inst_info : [srmp]
set_owner_status : [none]
get_owner_status : [srmp]
get_convo_listing : [srmp]
set_ntf_filter : [none]
MCE MNS 命令
map mce mns 命令：
uart:~$ map mce mns
mns - MCE MNS commands
Subcommands:
register : [none]
rfcomm_register : [none]
rfcomm_disconnect : [none]
l2cap_register : [none]
l2cap_disconnect : [none]
connect : <rsp: success, error> [rsp_code]
disconnect : <rsp: success, error> [rsp_code]
abort : <rsp: success, error> [rsp_code]
send_event : <rsp: noerror, error> [rsp_code] [srmp]
MSE 命令
map mse 命令：
uart:~$ map mse
mse - MSE commands
Subcommands:
mas : MSE MAS commands
mns : MSE MNS commands
MSE MAS 命令
map mse mas 命令：
uart:~$ map mse mas
mas - MSE MAS commands
Subcommands:
select : <instance_id>
register : [none]
rfcomm_register : [none]
rfcomm_disconnect : [none]
l2cap_register : [none]
l2cap_disconnect : [none]
connect : <rsp: success, error> [rsp_code]
disconnect : <rsp: success, error> [rsp_code]
abort : <rsp: success, error> [rsp_code]
set_folder : <rsp: success, error> [rsp_code]
set_ntf_reg : <rsp: noerror, error> [rsp_code]
get_folder_listing : <rsp: noerror, error> [rsp_code] [srmp]
get_msg_listing : <rsp: noerror, error> [rsp_code] [srmp]
get_msg : <rsp: noerror, error> [rsp_code] [srmp]
set_msg_status : <rsp: noerror, error> [rsp_code]
push_msg : <rsp: noerror, error> [rsp_code] [srmp]
update_inbox : <rsp: noerror, error> [rsp_code]
get_mas_inst_info : <rsp: noerror, error> [rsp_code] [srmp]
set_owner_status : <rsp: noerror, error> [rsp_code]
get_owner_status : <rsp: noerror, error> [rsp_code] [srmp]
get_convo_listing : <rsp: noerror, error> [rsp_code] [srmp]
set_ntf_filter : <rsp: noerror, error> [rsp_code]
MSE MNS 命令
map mse mns 命令：
uart:~$ map mse mns
mns - MSE MNS commands
Subcommands:
discover : [none]
rfcomm_connect : <channel> [supported_features]
rfcomm_disconnect : [none]
l2cap_connect : <psm> [supported_features]
l2cap_disconnect : [none]
connect : [none]
disconnect : [none]
abort : [none]
send_event : [none]
应用参数命令
map add_header app_param 命令：
uart:~$ map add_header app_param
app_param - Application parameter commands
Subcommands:
list : List all added application parameters
clear : Clear all application parameters
max_list_count : <count: 0-65535>
list_start_offset : <offset: 0-65535>
filter_msg_type : <type_mask: hex>
filter_period_begin : <time: YYYYMMDDTHHMMSS[+/-HHMM]>
filter_period_end : <time: YYYYMMDDTHHMMSS[+/-HHMM]>
filter_read_status : <no_filter/unread/read>
filter_recipient : <recipient_address>
filter_originator : <originator_address>
filter_priority : <no_filter/high/non_high>
attachment : <on/off>
transparent : <on/off>
retry : <on/off>
new_message : <on/off>
notification_status : <on/off>
mas_instance_id : <id: 0-255>
parameter_mask : <mask: hex>
folder_listing_size : <size: 0-65535>
listing_size : <size: 0-65535>
subject_length : <length: 0-255>
charset : <native/utf8>
fraction_request : <first/next>
fraction_deliver : <more/last>
status_indicator : <read/deleted/extended>
status_value : <yes/no>
mse_time : <time: YYYYMMDDTHHMMSS[+/-HHMM]>
database_id : <id_string: max 32 chars>
convo_listing_ver : <version_string: max 32 chars>
presence_availability : <unknown/offline/online/away/dnd/busy/meeting>
presence_text : <text>
last_activity : <time: YYYYMMDDTHHMMSS[+/-HHMM]>
filter_last_activity_begin : <time: YYYYMMDDTHHMMSS[+/-HHMM]>
filter_last_activity_end : <time: YYYYMMDDTHHMMSS[+/-HHMM]>
chat_state : <unknown/inactive/active/composing/paused/gone>
conversation_id : <id_string: max 32 chars>
folder_ver : <version_string: max 32 chars>
filter_msg_handle : <handle_string: max 16 chars>
notification_filter_mask : <mask: hex>
convo_parameter_mask : <mask: hex>
owner_uci : <uci_string>
extended_data : <data_string>
map_supported_features : [none]
message_handle : <handle_string: max 16 chars>
modify_text : <prepend/replace>
用法示例
SDP 发现
MCE 发现 MSE
MCE 可以发现远端设备上的 MSE 服务：
uart:~$ map mce mas discover
Found RFCOMM channel 0x06
Found GOEP L2CAP PSM 0x1003
Found MAP profile version 0x0104
Found MAP features 0x007fffff
Found service name: MAP MAS 0
Found MAP instance ID 0
Found MAP MSG type 0x1f
uart:~$
MSE 发现 MCE
MSE 可以发现远端设备上的 MCE 服务：
uart:~$ map mse mns discover
Found RFCOMM channel 0x06
Found GOEP L2CAP PSM 0x1003
Found MAP profile version 0x0104
Found MAP features 0x0077ffff
Found service name: MAP MNS
uart:~$
连接 MAP 传输
在创建 MAP 传输连接之前，应先建立 ACL 连接。
MAS 传输连接
RFCOMM 传输
uart:~$ map mce mas rfcomm_connect 6 0 7fffff
Security changed: XX:XX:XX:XX:XX:XX level 2
MCE MAS RFCOMM connected: 0x20005a00, addr: XX:XX:XX:XX:XX:XX, instance_id: 0
Selected MCE MAS instance_id 0 as default
uart:~$
uart:~$ map mse mas register
MSE MAS server(s) registered
uart:~$ map mse mas rfcomm_register
RFCOMM server (channel 06, mas_instance_id 0, map_supported_features 007fffff) is registered
MSE MAS SDP record 0 registered
RFCOMM server (channel 07, mas_instance_id 1, map_supported_features 007fffff) is registered
MSE MAS SDP record 1 registered
Security changed: XX:XX:XX:XX:XX:XX level 2
MSE MAS RFCOMM connected: 0x20005c00, addr: XX:XX:XX:XX:XX:XX, instance_id: 0
Selected MSE MAS instance_id 0 as default
uart:~$
L2CAP 传输
uart:~$ map mce mas l2cap_connect 1003 0 7fffff
Security changed: XX:XX:XX:XX:XX:XX level 2
MCE MAS L2CAP connected: 0x20005a00, addr: XX:XX:XX:XX:XX:XX, instance_id: 0
Selected MCE MAS instance_id 0 as default
uart:~$
uart:~$ map mse mas register
MSE MAS server(s) registered
uart:~$ map mse mas l2cap_register
L2CAP server (psm 1003, mas_instance_id 0, map_supported_features 007fffff) is registered
MSE MAS SDP record 0 registered
L2CAP server (psm 1005, mas_instance_id 1, map_supported_features 007fffff) is registered
MSE MAS SDP record 1 registered
Security changed: XX:XX:XX:XX:XX:XX level 2
MSE MAS L2CAP connected: 0x20005c00, addr: XX:XX:XX:XX:XX:XX, instance_id: 0
Selected MSE MAS instance_id 0 as default
uart:~$
MNS 传输连接
RFCOMM Transport
uart:~$ map mce mns register
MCE MNS server(s) registered
uart:~$ map mce mns rfcomm_register
RFCOMM server (channel 06, map_supported_features 0077ffff) is registered
MCE MNS SDP record registered
MCE MNS RFCOMM connected: 0x20005b00, addr: XX:XX:XX:XX:XX:XX
uart:~$
uart:~$ map mse mns rfcomm_connect 6 77ffff
MSE MNS RFCOMM connected: 0x20005d00, addr: XX:XX:XX:XX:XX:XX
uart:~$
L2CAP Transport
uart:~$ map mce mns register
MCE MNS server(s) registered
uart:~$ map mce mns l2cap_register
L2CAP server (psm 1003, map_supported_features 0077ffff) is registered
MCE MNS SDP record registered
MCE MNS L2CAP connected: 0x20005b00, addr: XX:XX:XX:XX:XX:XX
uart:~$
uart:~$ map mse mns l2cap_connect 1003 77ffff
MSE MNS L2CAP connected: 0x20005d00, addr: XX:XX:XX:XX:XX:XX
uart:~$
断开 MAP 传输
MAS 传输断开
RFCOMM 传输（MCE 发起）
uart:~$ map mce mas rfcomm_disconnect
MCE MAS RFCOMM disconnected: 0x20005a00
No connected MCE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
MSE MAS RFCOMM disconnected: 0x20005c00
No connected MSE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
RFCOMM 传输（MSE 发起）
MCE MAS RFCOMM disconnected: 0x20005a00
No connected MCE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
uart:~$ map mse mas rfcomm_disconnect
MSE MAS RFCOMM disconnected: 0x20005c00
No connected MSE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
L2CAP 传输（MCE 发起）
uart:~$ map mce mas l2cap_disconnect
MCE MAS L2CAP disconnected: 0x20005a00
No connected MCE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
MSE MAS L2CAP disconnected: 0x20005c00
No connected MSE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
L2CAP 传输（MSE 发起）
MCE MAS L2CAP disconnected: 0x20005a00
No connected MCE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
uart:~$ map mse mas l2cap_disconnect
MSE MAS L2CAP disconnected: 0x20005c00
No connected MSE MAS instance available for conn XX:XX:XX:XX:XX:XX
uart:~$
MNS 传输断开
RFCOMM Transport (MSE initiates)
MCE MNS RFCOMM disconnected: 0x20005b00
uart:~$
uart:~$ map mse mns rfcomm_disconnect
MSE MNS RFCOMM disconnected: 0x20005d00
uart:~$
RFCOMM Transport (MCE initiates)
uart:~$ map mce mns rfcomm_disconnect
MCE MNS RFCOMM disconnected: 0x20005b00
uart:~$
MSE MNS RFCOMM disconnected: 0x20005d00
uart:~$
L2CAP Transport (MSE initiates)
MCE MNS L2CAP disconnected: 0x20005b00
uart:~$
uart:~$ map mse mns l2cap_disconnect
MSE MNS L2CAP disconnected: 0x20005d00
uart:~$
L2CAP Transport (MCE initiates)
uart:~$ map mce mns l2cap_disconnect
MCE MNS L2CAP disconnected: 0x20005b00
uart:~$
MSE MNS L2CAP disconnected: 0x20005d00
uart:~$
连接到 MAP 服务器
MCE MAS 连接到 MSE MAS
uart:~$ map mce mas connect
MCE MAS 0x20005a00 conn rsp, rsp_code Success, version 10, mopl 0fff
HI 4a Len 16
00000000: bb 58 2b 40 42 0c 11 db b0 de 08 00 20 0c 9a 66 |.X+@B... .... ..f|
HI cb Len 4
Conn ID: 00000001
uart:~$
MSE MAS 0x20005c00 conn req, version 10, mopl 0fff
HI 46 Len 16
00000000: bb 58 2b 40 42 0c 11 db b0 de 08 00 20 0c 9a 66 |.X+@B... .... ..f|
HI 4c Len 6
T 29 L 4
00000000: 00 77 ff ff |.w.. |
uart:~$ map mse mas connect success
uart:~$
MSE MNS 连接到 MCE MNS
uart:~$ map mse mns connect
MSE MNS 0x20005d00 conn rsp, rsp_code Success, version 10, mopl 0fff
HI 4a Len 16
00000000: bb 58 2b 41 42 0c 11 db b0 de 08 00 20 0c 9a 66 |.X+AB... .... ..f|
HI cb Len 4
Conn ID: 00000001
uart:~$
MCE MNS 0x20005b00 conn req, version 10, mopl 0fff
HI 46 Len 16
00000000: bb 58 2b 41 42 0c 11 db b0 de 08 00 20 0c 9a 66 |.X+AB... .... ..f|
uart:~$ map mce mns connect success
uart:~$
断开与 MAP 服务器的连接
MCE MAS 断开与 MSE MAS 的连接
uart:~$ map mce mas disconnect
MCE MAS 0x20005a00 disconn rsp, rsp_code Success
uart:~$
MSE MAS 0x20005c00 disconn req
HI c0 Len 4
Conn ID: 00000001
uart:~$ map mse mas disconnect success
uart:~$
MSE MNS 断开与 MCE MNS 的连接
uart:~$ map mse mns disconnect
MSE MNS 0x20005d00 disconn rsp, rsp_code Success
uart:~$
MCE MNS 0x20005b00 disconn req
HI c0 Len 4
Conn ID: 00000001
uart:~$ map mce mns disconnect success
uart:~$
MAP 操作
设置通知注册
uart:~$ map mce mas set_ntf_reg
Adding default application parameters:
Notification status: 0x01
MCE MAS 0x20005a00 set_ntf_reg rsp, rsp_code Success
uart:~$
MSE MAS 0x20005c00 set_ntf_reg req, final true, data len 52
HI cb Len 4
Conn ID: 00000001
HI 42 Len 34
00000000: 78 2d 62 74 2f 4d 41 50 2d 4e 6f 74 69 66 69 63 |x-bt/MAP -Notific|
00000010: 61 74 69 6f 6e 52 65 67 69 73 74 72 61 74 69 6f |ationReg istratio|
00000020: 6e 00 |n. |
HI 4c Len 3
T 0e L 1
00000000: 01 |. |
HI 49 Len 1
00000000: 30 |0 |
uart:~$ map mse mas set_ntf_reg noerror
uart:~$
设置文件夹
uart:~$ map mce mas set_folder /
MCE MAS 0x20005a00 set_folder rsp, rsp_code Success
uart:~$ map mce mas set_folder telecom
MCE MAS 0x20005a00 set_folder rsp, rsp_code Success
uart:~$ map mce mas set_folder ..
MCE MAS 0x20005a00 set_folder rsp, rsp_code Success
uart:~$
MSE MAS 0x20005c00 set_folder req, flags 2, data len 8
HI cb Len 4
Conn ID: 00000001
HI 01 Len 0
uart:~$ map mse mas set_folder success
MSE MAS 0x20005c00 set_folder req, flags 2, data len 24
HI cb Len 4
Conn ID: 00000001
HI 01 Len 16
00000000: 00 74 00 65 00 6c 00 65 00 63 00 6f 00 6d 00 00 |.t.e.l.e .c.o.m..|
uart:~$ map mse mas set_folder success
MSE MAS 0x20005c00 set_folder req, flags 3, data len 8
HI cb Len 4
Conn ID: 00000001
HI 01 Len 0
uart:~$ map mse mas set_folder success
uart:~$
获取文件夹列表
RFCOMM Transport
使用 RFCOMM 传输时，可以多次调用同一个 shell 命令，直到完整消息被传送完毕。
uart:~$ map mce mas get_folder_listing
MCE MAS 0x20005a00 get_folder_listing rsp, rsp_code Continue, data len 252
HI 48 Len 249
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
uart:~$ map mce mas get_folder_listing
MCE MAS 0x20005a00 get_folder_listing rsp, rsp_code Success, data len 4
HI 49 Len 1
00000000: 00 |. |
uart:~$
MSE MAS 0x20005c00 get_folder_listing req, final true, data len 30
HI cb Len 4
Conn ID: 00000001
HI 42 Len 22
00000000: 78 2d 6f 62 65 78 2f 66 6f 6c 64 65 72 2d 6c 69 |x-obex/f older-li|
00000010: 73 74 69 6e 67 00 |sting. |
uart:~$ map mse mas get_folder_listing noerror
MSE MAS 0x20005c00 get_folder_listing req, final true, data len 0
uart:~$ map mse mas get_folder_listing noerror
uart:~$
启用 SRM 的 L2CAP 传输
当使用默认启用 SRM 的 L2CAP 传输时，无需再次发送 GET 请求。
uart:~$ map mce mas get_folder_listing
MCE MAS 0x20005c98 get_folder_listing rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 48 Len 247
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
MCE MAS 0x20005a00 get_folder_listing rsp, rsp_code Success, data len 6
HI 49 Len 3
00000000: 67 3e 00 |g>. |
...
uart:~$
MSE MAS 0x20005c00 get_folder_listing req, final true, data len 32
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 22
00000000: 78 2d 6f 62 65 78 2f 66 6f 6c 64 65 72 2d 6c 69 |x-obex/f older-li|
00000010: 73 74 69 6e 67 00 |sting. |
...
uart:~$ map mse mas get_folder_listing noerror
uart:~$ map mse mas get_folder_listing noerror
uart:~$
启用 SRM 和 SRMP 的 L2CAP 传输
当使用已启用 SRM 和 SRMP 的 L2CAP 传输时，需要继续发送 GET 请求，直到 SRMP 被禁用。
uart:~$ map mce mas get_folder_listing srmp
MCE MAS 0x20005a00 get_folder_listing rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 48 Len 247
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
MCE MAS 0x20005a00 get_folder_listing rsp, rsp_code Success, data len 6
HI 49 Len 3
00000000: 67 3e 00 |g>. |
...
uart:~$
MSE MAS 0x20005c00 get_folder_listing req, final true, data len 34
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
HI 42 Len 22
00000000: 78 2d 6f 62 65 78 2f 66 6f 6c 64 65 72 2d 6c 69 |x-obex/f older-li|
00000010: 73 74 69 6e 67 00 |sting. |
uart:~$ map mse mas get_folder_listing noerror
MSE MAS 0x20005c00 get_folder_listing req, final true, data len 0
uart:~$ map mse mas get_folder_listing noerror
uart:~$
获取消息列表
RFCOMM Transport
uart:~$ map mce mas get_msg_listing
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Continue, data len 252
HI 4c Len 29
T 0d L 1
00000000: 00 |. |
T 19 L 20
00000000: 32 30 32 35 30 31 30 31 54 31 32 30 30 30 30 2b |20250101 T120000+|
00000010: 30 30 30 30 |0000 |
T 12 L 2
00000000: 00 02 |.. |
HI 48 Len 217
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
uart:~$ map mce mas get_msg_listing
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Success, data len 52
HI 49 Len 49
00000000: 22 20 73 65 6e 74 3d 22 6e 6f 22 20 70 72 6f 74 |" sent=" no" prot|
...
uart:~$
MSE MAS 0x20005c00 get_msg_listing req, final true, data len 32
HI cb Len 4
Conn ID: 00000001
HI 42 Len 21
00000000: 78 2d 62 74 2f 4d 41 50 2d 6d 73 67 2d 6c 69 73 |x-bt/MAP -msg-lis|
00000010: 74 69 6e 67 00 |ting. |
HI 01 Len 0
uart:~$ map mse mas get_msg_listing noerror
Adding default application parameters:
New message: 0
MSE time: 20250101T120000+0000
Listing size: 2
MSE MAS 0x20005c00 get_msg_listing req, final true, data len 0
uart:~$ map mse mas get_msg_listing noerror
uart:~$
L2CAP Transport with SRM
uart:~$ map mce mas get_msg_listing
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 4c Len 29
T 0d L 1
00000000: 00 |. |
T 19 L 20
00000000: 32 30 32 35 30 31 30 31 54 31 32 30 30 30 30 2b |20250101 T120000+|
00000010: 30 30 30 30 |0000 |
T 12 L 2
00000000: 00 02 |.. |
HI 48 Len 215
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
...
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Continue, data len 252
HI 48 Len 249
00000000: 2e 63 6f 6d 22 20 72 65 63 69 70 69 65 6e 74 5f |.com" re cipient_|
...
MCE MAS 0x20005c98 get_msg_listing rsp, rsp_code Success, data len 54
HI 49 Len 51
00000000: 65 73 22 20 73 65 6e 74 3d 22 6e 6f 22 20 70 72 |es" sent ="no" pr|
00000010: 6f 74 65 63 74 65 64 3d 22 6e 6f 22 2f 3e 0d 0a |otected= "no"/>..|
...
uart:~$
MSE MAS 0x20005c00 get_msg_listing req, final true, data len 34
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 21
00000000: 78 2d 62 74 2f 4d 41 50 2d 6d 73 67 2d 6c 69 73 |x-bt/MAP -msg-lis|
00000010: 74 69 6e 67 00 |ting. |
uart:~$ map mse mas get_msg_listing noerror
Adding default application parameters:
New message: 0
MSE time: 20250101T120000+0000
Listing size: 2
uart:~$ map mse mas get_msg_listing noerror
uart:~$ map mse mas get_msg_listing noerror
uart:~$
L2CAP Transport with SRM and SRMP
uart:~$ map mce mas get_msg_listing srmp
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 4c Len 29
T 0d L 1
00000000: 00 |. |
T 19 L 20
00000000: 32 30 32 35 30 31 30 31 54 31 32 30 30 30 30 2b |20250101 T120000+|
00000010: 30 30 30 30 |0000 |
T 12 L 2
00000000: 00 02 |.. |
HI 48 Len 215
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
...
uart:~$ map mce mas get_msg_listing
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Continue, data len 252
HI 48 Len 249
00000000: 2e 63 6f 6d 22 20 72 65 63 69 70 69 65 6e 74 5f |.com" re cipient_|
00000010: 6e 61 6d 65 3d 22 42 6f 62 22 20 72 65 63 69 70 |name="Bo b" recip|
...
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Success, data len 54
HI 49 Len 51
00000000: 65 73 22 20 73 65 6e 74 3d 22 6e 6f 22 20 70 72 |es" sent ="no" pr|
00000010: 6f 74 65 63 74 65 64 3d 22 6e 6f 22 2f 3e 0d 0a |otected= "no"/>..|
...
uart:~$
MSE MAS 0x20005c00 get_msg_listing req, final true, data len 36
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
HI 42 Len 21
00000000: 78 2d 62 74 2f 4d 41 50 2d 6d 73 67 2d 6c 69 73 |x-bt/MAP -msg-lis|
00000010: 74 69 6e 67 00 |ting. |
HI 01 Len 0
uart:~$ map mse mas get_msg_listing noerror
Adding default application parameters:
New message: 0
MSE time: 20250101T120000+0000
Listing size: 2
MSE MAS 0x20005c00 get_msg_listing req, final true, data len 0
uart:~$ map mse mas get_msg_listing noerror
uart:~$ map mse mas get_msg_listing noerror
uart:~$
获取消息
RFCOMM Transport
uart:~$ map mce mas get_msg 0000000000000001
Adding default application parameters:
Attachment: OFF (0x00)
Charset: UTF-8 (0x01)
MCE MAS 0x20005a00 get_msg rsp, rsp_code Continue, data len 252
HI 48 Len 249
00000000: 42 45 47 49 4e 3a 42 4d 53 47 0d 0a 56 45 52 53 |BEGIN:BM SG..VERS|
00000010: 49 4f 4e 3a 31 2e 30 0d 0a 53 54 41 54 55 53 3a |ION:1.0. .STATUS:|
...
uart:~$ map mce mas get_msg 0000000000000001
MCE MAS 0x20005a00 get_msg rsp, rsp_code Success, data len 87
HI 49 Len 84
00000000: 3c 3e 3f 2f 0a 2d 20 4e 75 6d 62 65 72 73 3a 20 |<>?/.- N umbers: |
00000010: 30 31 32 33 34 35 36 37 38 39 0a 0a 45 6e 64 20 |01234567 89..End |
...
uart:~$
MSE MAS 0x20005c00 get_msg req, final true, data len 67
HI cb Len 4
Conn ID: 00000001
HI 42 Len 13
00000000: 78 2d 62 74 2f 6d 65 73 73 61 67 65 00 |x-bt/mes sage. |
HI 01 Len 34
00000000: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 |.0.0.0.0 .0.0.0.0|
00000010: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 31 |.0.0.0.0 .0.0.0.1|
00000020: 00 00 |.. |
HI 4c Len 6
T 0a L 1
00000000: 00 |. |
T 14 L 1
00000000: 01 |. |
uart:~$ map mse mas get_msg noerror
MSE MAS 0x20005c00 get_msg req, final true, data len 0
uart:~$ map mse mas get_msg noerror
uart:~$
L2CAP Transport with SRM
uart:~$ map mce mas get_msg 0000000000000001
Adding default application parameters:
Attachment: OFF (0x00)
Charset: UTF-8 (0x01)
MCE MAS 0x20005a00 get_msg rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 48 Len 247
00000000: 42 45 47 49 4e 3a 42 4d 53 47 0d 0a 56 45 52 53 |BEGIN:BM SG..VERS|
00000010: 49 4f 4e 3a 31 2e 30 0d 0a 53 54 41 54 55 53 3a |ION:1.0. .STATUS:|
...
MCE MAS 0x20005a00 get_msg rsp, rsp_code Success, data len 89
HI 49 Len 86
00000000: 2c 2e 3c 3e 3f 2f 0a 2d 20 4e 75 6d 62 65 72 73 |,.<>?/.- Numbers|
uart:~$
MSE MAS 0x20005c00 get_msg req, final true, data len 69
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 13
00000000: 78 2d 62 74 2f 6d 65 73 73 61 67 65 00 |x-bt/mes sage. |
HI 01 Len 34
00000000: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 |.0.0.0.0 .0.0.0.0|
00000010: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 31 |.0.0.0.0 .0.0.0.1|
00000020: 00 00 |.. |
HI 4c Len 6
T 0a L 1
00000000: 00 |. |
T 14 L 1
00000000: 01 |. |
uart:~$ map mse mas get_msg noerror
uart:~$ map mse mas get_msg noerror
uart:~$
L2CAP Transport with SRM and SRMP
uart:~$ map mce mas get_msg 0000000000000001 srmp
Adding default application parameters:
Attachment: OFF (0x00)
Charset: UTF-8 (0x01)
MCE MAS 0x20005a00 get_msg rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 48 Len 247
00000000: 42 45 47 49 4e 3a 42 4d 53 47 0d 0a 56 45 52 53 |BEGIN:BM SG..VERS|
...
uart:~$ map mce mas get_msg 0000000000000001
MCE MAS 0x20005a00 get_msg rsp, rsp_code Continue, data len 252
HI 48 Len 249
00000000: 37 38 39 0d 0a 45 4e 44 3a 56 43 41 52 44 0d 0a |789..END :VCARD..|
00000010: 42 45 47 49 4e 3a 42 42 4f 44 59 0d 0a 43 48 41 |BEGIN:BB ODY..CHA|
...
MCE MAS 0x20005a00 get_msg rsp, rsp_code Success, data len 89
HI 49 Len 86
00000000: 2c 2e 3c 3e 3f 2f 0a 2d 20 4e 75 6d 62 65 72 73 |,.<>?/.- Numbers|
...
uart:~$
MSE MAS 0x20005c00 get_msg req, final true, data len 71
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
HI 42 Len 13
00000000: 78 2d 62 74 2f 6d 65 73 73 61 67 65 00 |x-bt/mes sage. |
HI 01 Len 34
00000000: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 |.0.0.0.0 .0.0.0.0|
00000010: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 31 |.0.0.0.0 .0.0.0.1|
00000020: 00 00 |.. |
HI 4c Len 6
T 0a L 1
00000000: 00 |. |
T 14 L 1
00000000: 01 |. |
uart:~$ map mse mas get_msg noerror
MSE MAS 0x20005c00 get_msg req, final true, data len 0
uart:~$ map mse mas get_msg noerror
uart:~$ map mse mas get_msg noerror
uart:~$
设置消息状态
uart:~$ map mce mas set_msg_status 0000000000000001
Adding default application parameters:
Status indicator: 0x00
Status value: 0x00
MCE MAS 0x20005a00 set_msg_status rsp, rsp_code Success
uart:~$
MSE MAS 0x20005c00 set_msg_status req, final true, data len 77
HI cb Len 4
Conn ID: 00000001
HI 01 Len 34
00000000: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 |.0.0.0.0 .0.0.0.0|
00000010: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 31 |.0.0.0.0 .0.0.0.1|
00000020: 00 00 |.. |
HI 42 Len 19
00000000: 78 2d 62 74 2f 6d 65 73 73 61 67 65 53 74 61 74 |x-bt/mes sageStat|
00000010: 75 73 00 |us. |
HI 4c Len 6
T 17 L 1
00000000: 00 |. |
T 18 L 1
00000000: 00 |. |
HI 49 Len 1
00000000: 30 |0 |
uart:~$ map mse mas set_msg_status noerror
uart:~$
推送消息
RFCOMM Transport
uart:~$ map mce mas push_msg
Adding default application parameters:
Charset: UTF-8 (0x01)
MCE MAS 0x20005a00 push_msg rsp, rsp_code Continue, data len 0
...
uart:~$ map mce mas push_msg
MCE MAS 0x20005a00 push_msg rsp, rsp_code Success, data len 37
HI 01 Len 34
00000000: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 |.0.0.0.0 .0.0.0.0|
00000010: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 31 |.0.0.0.0 .0.0.0.1|
00000020: 00 00 |.. |
...
uart:~$
MSE MAS 0x20005c00 push_msg req, final false, data len 252
HI cb Len 4
Conn ID: 00000001
HI 42 Len 13
00000000: 78 2d 62 74 2f 6d 65 73 73 61 67 65 00 |x-bt/mes sage. |
HI 01 Len 0
HI 4c Len 3
T 14 L 1
00000000: 01 |. |
HI 48 Len 219
00000000: 42 45 47 49 4e 3a 42 4d 53 47 0d 0a 56 45 52 53 |BEGIN:BM SG..VERS|
00000010: 49 4f 4e 3a 31 2e 30 0d 0a 53 54 41 54 55 53 3a |ION:1.0. .STATUS:|
...
uart:~$ map mse mas push_msg noerror
MSE MAS 0x20005c00 push_msg req, final true, data len 117
HI 49 Len 114
00000000: 61 63 74 65 72 73 3a 20 40 23 24 25 26 2a 28 29 |acters: @#$%&*()|
...
uart:~$ map mse mas push_msg noerror
uart:~$
L2CAP Transport with SRM
uart:~$ map mce mas push_msg
Adding default application parameters:
Charset: UTF-8 (0x01)
MCE MAS 0x20005a00 push_msg rsp, rsp_code Continue, data len 2
HI 97 Len 1
OBEX SRM: 01
...
uart:~$ map mce mas push_msg
uart:~$ map mce mas push_msg
MCE MAS 0x20005a00 push_msg rsp, rsp_code Success, data len 37
HI 01 Len 34
00000000: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 |.0.0.0.0 .0.0.0.0|
00000010: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 31 |.0.0.0.0 .0.0.0.1|
00000020: 00 00 |.. |
...
uart:~$
MSE MAS 0x20005c00 push_msg req, final false, data len 252
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 13
00000000: 78 2d 62 74 2f 6d 65 73 73 61 67 65 00 |x-bt/mes sage. |
HI 01 Len 0
HI 4c Len 3
T 14 L 1
00000000: 01 |. |
HI 48 Len 217
00000000: 42 45 47 49 4e 3a 42 4d 53 47 0d 0a 56 45 52 53 |BEGIN:BM SG..VERS|
00000010: 49 4f 4e 3a 31 2e 30 0d 0a 53 54 41 54 55 53 3a |ION:1.0. .STATUS:|
...
uart:~$ map mse mas push_msg noerror
MSE MAS 0x20005c00 push_msg req, final false, data len 252
HI 48 Len 249
00000000: 54 46 2d 38 3a 2b 30 31 32 33 34 35 36 37 38 39 |TF-8:+01 23456789|
...
MSE MAS 0x20005c00 push_msg req, final true, data len 119
HI 49 Len 116
00000000: 61 72 61 63 74 65 72 73 3a 20 40 23 24 25 26 2a |aracters : @#$%&*|
...
uart:~$ map mse mas push_msg noerror
uart:~$
L2CAP Transport with SRM and SRMP
uart:~$ map mce mas push_msg
Adding default application parameters:
Charset: UTF-8 (0x01)
MCE MAS 0x20005a00 push_msg rsp, rsp_code Continue, data len 4
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
...
uart:~$ map mce mas push_msg
MCE MAS 0x20005c98 push_msg rsp, rsp_code Continue, data len 0
uart:~$ map mce mas push_msg
MCE MAS 0x20005a00 push_msg rsp, rsp_code Success, data len 37
HI 01 Len 34
00000000: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 |.0.0.0.0 .0.0.0.0|
00000010: 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 31 |.0.0.0.0 .0.0.0.1|
00000020: 00 00 |.. |
...
uart:~$
MSE MAS 0x20005c00 push_msg req, final false, data len 252
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 13
00000000: 78 2d 62 74 2f 6d 65 73 73 61 67 65 00 |x-bt/mes sage. |
HI 01 Len 0
HI 4c Len 3
T 14 L 1
00000000: 01 |. |
HI 48 Len 217
00000000: 42 45 47 49 4e 3a 42 4d 53 47 0d 0a 56 45 52 53 |BEGIN:BM SG..VERS|
00000010: 49 4f 4e 3a 31 2e 30 0d 0a 53 54 41 54 55 53 3a |ION:1.0. .STATUS:|
...
uart:~$ map mse mas push_msg noerror srmp
MSE MAS 0x20005c00 push_msg req, final false, data len 252
HI 48 Len 249
00000000: 54 46 2d 38 3a 2b 30 31 32 33 34 35 36 37 38 39 |TF-8:+01 23456789|
...
uart:~$ map mse mas push_msg noerror
MSE MAS 0x20005c00 push_msg req, final true, data len 119
HI 49 Len 116
00000000: 61 72 61 63 74 65 72 73 3a 20 40 23 24 25 26 2a |aracters : @#$%&*|
...
uart:~$ map mse mas push_msg noerror
uart:~$
更新收件箱
uart:~$ map mce mas update_inbox
MCE MAS 0x20005a00 update_inbox rsp, rsp_code Success
uart:~$
MSE MAS 0x20005c00 update_inbox req, final true, data len 35
HI cb Len 4
Conn ID: 00000001
HI 42 Len 23
00000000: 78 2d 62 74 2f 4d 41 50 2d 6d 65 73 73 61 67 65 |x-bt/MAP -message|
00000010: 55 70 64 61 74 65 00 |Update. |
HI 49 Len 1
00000000: 30 |0 |
uart:~$ map mse mas update_inbox noerror
uart:~$
获取 MAS 实例信息
RFCOMM Transport
uart:~$ map mce mas get_mas_inst_info
Adding default application parameters:
Instance ID: 0
MCE MAS 0x20005a00 get_mas_inst_info rsp, rsp_code Success, data len 21
HI 49 Len 18
00000000: 4d 41 53 20 49 6e 73 74 61 6e 63 65 20 49 6e 66 |MAS Inst ance Inf|
00000010: 6f 00 |o. |
uart:~$
MSE MAS 0x20005c00 get_mas_inst_info req, final true, data len 42
HI cb Len 4
Conn ID: 00000001
HI 42 Len 28
00000000: 78 2d 62 74 2f 4d 41 53 49 6e 73 74 61 6e 63 65 |x-bt/MAS Instance|
00000010: 49 6e 66 6f 72 6d 61 74 69 6f 6e 00 |Informat ion. |
HI 4c Len 3
T 0f L 1
00000000: 00 |. |
uart:~$ map mse mas get_mas_inst_info noerror
uart:~$
L2CAP Transport with SRM
uart:~$ map mce mas get_mas_inst_info
Adding default application parameters:
Instance ID: 0
MCE MAS 0x20005a00 get_mas_inst_info rsp, rsp_code Success, data len 23
HI 97 Len 1
OBEX SRM: 01
HI 49 Len 18
00000000: 4d 41 53 20 49 6e 73 74 61 6e 63 65 20 49 6e 66 |MAS Inst ance Inf|
00000010: 6f 00 |o. |
uart:~$
MSE MAS 0x20005c00 get_mas_inst_info req, final true, data len 44
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 28
00000000: 78 2d 62 74 2f 4d 41 53 49 6e 73 74 61 6e 63 65 |x-bt/MAS Instance|
00000010: 49 6e 66 6f 72 6d 61 74 69 6f 6e 00 |Informat ion. |
HI 4c Len 3
T 0f L 1
00000000: 00 |. |
uart:~$ map mse mas get_mas_inst_info noerror
uart:~$
L2CAP Transport with SRM and SRMP
uart:~$ map mce mas get_mas_inst_info srmp
Adding default application parameters:
Instance ID: 0
MCE MAS 0x20005a00 get_mas_inst_info rsp, rsp_code Success, data len 23
HI 97 Len 1
OBEX SRM: 01
HI 49 Len 18
00000000: 4d 41 53 20 49 6e 73 74 61 6e 63 65 20 49 6e 66 |MAS Inst ance Inf|
00000010: 6f 00 |o. |
uart:~$
MSE MAS 0x20005c00 get_mas_inst_info req, final true, data len 46
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
HI 42 Len 28
00000000: 78 2d 62 74 2f 4d 41 53 49 6e 73 74 61 6e 63 65 |x-bt/MAS Instance|
00000010: 49 6e 66 6f 72 6d 61 74 69 6f 6e 00 |Informat ion. |
HI 4c Len 3
T 0f L 1
00000000: 00 |. |
uart:~$ map mse mas get_mas_inst_info noerror
uart:~$
设置所有者状态
uart:~$ map mce mas set_owner_status
Adding default application parameters:
Chat state: 0x00
MCE MAS 0x20005a00 set_owner_status rsp, rsp_code Success
uart:~$
MSE MAS 0x20005c00 set_owner_status req, final true, data len 35
HI cb Len 4
Conn ID: 00000001
HI 42 Len 17
00000000: 78 2d 62 74 2f 6f 77 6e 65 72 53 74 61 74 75 73 |x-bt/own erStatus|
00000010: 00 |. |
HI 4c Len 3
T 21 L 1
00000000: 00 |. |
HI 49 Len 1
00000000: 30 |0 |
uart:~$ map mse mas set_owner_status noerror
uart:~$
获取所有者状态
RFCOMM Transport
uart:~$ map mce mas get_owner_status
MCE MAS 0x20005a00 get_owner_status rsp, rsp_code Success, data len 18
HI 4c Len 12
T 1c L 1
00000000: 00 |. |
T 1d L 7
00000000: 55 6e 6b 6e 6f 77 6e |Unknown |
uart:~$
MSE MAS 0x20005c00 get_owner_status req, final true, data len 25
HI cb Len 4
Conn ID: 00000001
HI 42 Len 17
00000000: 78 2d 62 74 2f 6f 77 6e 65 72 53 74 61 74 75 73 |x-bt/own erStatus|
00000010: 00 |. |
uart:~$ map mse mas get_owner_status noerror
Adding default application parameters:
Presence: 0x00
Presence text: Unknown
uart:~$
L2CAP Transport with SRM
uart:~$ map mce mas get_owner_status
MCE MAS 0x20005a00 get_owner_status rsp, rsp_code Success, data len 20
HI 97 Len 1
OBEX SRM: 01
HI 4c Len 12
T 1c L 1
00000000: 00 |. |
T 1d L 7
00000000: 55 6e 6b 6e 6f 77 6e |Unknown |
HI 49 Len 0
uart:~$
MSE MAS 0x20005c00 get_owner_status req, final true, data len 27
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 17
00000000: 78 2d 62 74 2f 6f 77 6e 65 72 53 74 61 74 75 73 |x-bt/own erStatus|
00000010: 00 |. |
uart:~$ map mse mas get_owner_status noerror
Adding default application parameters:
Presence: 0x00
Presence text: Unknown
uart:~$
L2CAP Transport with SRM and SRMP
uart:~$ map mce mas get_owner_status srmp
MCE MAS 0x20005a00 get_owner_status rsp, rsp_code Success, data len 20
HI 97 Len 1
OBEX SRM: 01
HI 4c Len 12
T 1c L 1
00000000: 00 |. |
T 1d L 7
00000000: 55 6e 6b 6e 6f 77 6e |Unknown |
HI 49 Len 0
uart:~$
MSE MAS 0x20005c00 get_owner_status req, final true, data len 29
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
HI 42 Len 17
00000000: 78 2d 62 74 2f 6f 77 6e 65 72 53 74 61 74 75 73 |x-bt/own erStatus|
00000010: 00 |. |
uart:~$ map mse mas get_owner_status noerror
Adding default application parameters:
Presence: 0x00
Presence text: Unknown
uart:~$
获取会话列表
RFCOMM Transport
uart:~$ map mce mas get_convo_listing
MCE MAS 0x20005a00 get_convo_listing rsp, rsp_code Continue, data len 252
HI 4c Len 72
T 12 L 2
00000000: 00 02 |.. |
T 1a L 32
00000000: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
00000010: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
T 1b L 32
00000000: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
00000010: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
HI 48 Len 174
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
uart:~$ map mce mas get_convo_listing
MCE MAS 0x20005a00 get_convo_listing rsp, rsp_code Success, data len 117
HI 49 Len 114
00000000: 22 20 6e 61 6d 65 3d 22 42 6f 62 22 20 70 72 65 |" name=" Bob" pre|
...
uart:~$
MSE MAS 0x20005c00 get_convo_listing req, final true, data len 31
HI cb Len 4
Conn ID: 00000001
HI 42 Len 23
00000000: 78 2d 62 74 2f 4d 41 50 2d 63 6f 6e 76 6f 2d 6c |x-bt/MAP -convo-l|
00000010: 69 73 74 69 6e 67 00 |isting. |
uart:~$ map mse mas get_convo_listing noerror
Adding default application parameters:
Listing size: 2
Database ID: 00000000000000010000000000000001
Conversation version counter: 00000000000000010000000000000001
MSE MAS 0x20005c00 get_convo_listing req, final true, data len 0
uart:~$ map mse mas get_convo_listing noerror
uart:~$
L2CAP Transport with SRM
uart:~$ map mce mas get_convo_listing
MCE MAS 0x20005a00 get_convo_listing rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 4c Len 72
T 12 L 2
00000000: 00 02 |.. |
T 1a L 32
00000000: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
00000010: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
T 1b L 32
00000000: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
00000010: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
HI 48 Len 172
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
MCE MAS 0x20005a00 get_convo_listing rsp, rsp_code Success, data len 119
HI 49 Len 116
00000000: 32 31 22 20 6e 61 6d 65 3d 22 42 6f 62 22 20 70 |21" name ="Bob" p|
...
uart:~$
MSE MAS 0x20005c00 get_convo_listing req, final true, data len 33
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 23
00000000: 78 2d 62 74 2f 4d 41 50 2d 63 6f 6e 76 6f 2d 6c |x-bt/MAP -convo-l|
00000010: 69 73 74 69 6e 67 00 |isting. |
uart:~$ map mse mas get_convo_listing noerror
Adding default application parameters:
Listing size: 2
Database ID: 00000000000000010000000000000001
Conversation version counter: 00000000000000010000000000000001
uart:~$ map mse mas get_convo_listing noerror
uart:~$
L2CAP Transport with SRM and SRMP
uart:~$ map mce mas get_convo_listing srmp
MCE MAS 0x20005a00 get_convo_listing rsp, rsp_code Continue, data len 252
HI 97 Len 1
OBEX SRM: 01
HI 4c Len 72
T 12 L 2
00000000: 00 02 |.. |
T 1a L 32
00000000: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
00000010: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
T 1b L 32
00000000: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
00000010: 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 |00000000 00000001|
HI 48 Len 172
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
uart:~$ map mce mas get_convo_listing
MCE MAS 0x20005a00 get_convo_listing rsp, rsp_code Continue, data len 252
HI 48 Len 249
00000000: 79 65 73 22 20 76 65 72 73 69 6f 6e 5f 63 6f 75 |yes" ver sion_cou|
...
MCE MAS 0x20005a00 get_convo_listing rsp, rsp_code Success, data len 119
HI 49 Len 116
00000000: 32 31 22 20 6e 61 6d 65 3d 22 42 6f 62 22 20 70 |21" name ="Bob" p|
...
uart:~$
MSE MAS 0x20005c00 get_convo_listing req, final true, data len 35
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
HI 42 Len 23
00000000: 78 2d 62 74 2f 4d 41 50 2d 63 6f 6e 76 6f 2d 6c |x-bt/MAP -convo-l|
00000010: 69 73 74 69 6e 67 00 |isting. |
uart:~$ map mse mas get_convo_listing noerror
Adding default application parameters:
Listing size: 2
Database ID: 00000000000000010000000000000001
Conversation version counter: 00000000000000010000000000000001
MSE MAS 0x20005c00 get_convo_listing req, final true, data len 0
uart:~$ map mse mas get_convo_listing noerror
uart:~$ map mse mas get_convo_listing noerror
uart:~$
设置通知过滤器
uart:~$ map mce mas set_ntf_filter
Adding default application parameters:
Notification filter mask: 0x00007fff
MCE MAS 0x20005a00 set_ntf_filter rsp, rsp_code Success
uart:~$
MSE MAS 0x20005c00 set_ntf_filter req, final true, data len 50
HI cb Len 4
Conn ID: 00000001
HI 42 Len 29
00000000: 78 2d 62 74 2f 4d 41 50 2d 6e 6f 74 69 66 69 63 |x-bt/MAP -notific|
00000010: 61 74 69 6f 6e 2d 66 69 6c 74 65 72 00 |ation-fi lter. |
HI 4c Len 6
T 25 L 4
00000000: 00 00 7f ff |.... |
HI 49 Len 1
00000000: 30 |0 |
uart:~$ map mse mas set_ntf_filter noerror
uart:~$
发送事件
RFCOMM Transport
uart:~$ map mse mns send_event
Adding default application parameters:
Instance ID: 0
MSE MNS 0x20005d00 send_event rsp, rsp_code Continue, data len 0
uart:~$ map mse mns send_event
MSE MNS 0x20005d00 send_event rsp, rsp_code Success, data len 0
uart:~$
MCE MNS 0x20005b00 send_event req, final false, data len 252
HI cb Len 4
Conn ID: 00000001
HI 42 Len 22
00000000: 78 2d 62 74 2f 4d 41 50 2d 65 76 65 6e 74 2d 72 |x-bt/MAP -event-r|
00000010: 65 70 6f 72 74 00 |eport. |
HI 4c Len 3
T 0f L 1
00000000: 00 |. |
HI 48 Len 213
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
uart:~$ map mce mns send_event noerror
MCE MNS 0x20005b00 send_event req, final true, data len 8
HI 49 Len 5
00000000: 6f 72 74 3e 00 |ort>. |
uart:~$ map mce mns send_event noerror
uart:~$
L2CAP Transport with SRM
uart:~$ map mse mns send_event
Adding default application parameters:
Instance ID: 0
MSE MNS 0x20005d00 send_event rsp, rsp_code Continue, data len 2
HI 97 Len 1
OBEX SRM: 01
uart:~$ map mse mns send_event
MSE MNS 0x20005d00 send_event rsp, rsp_code Success, data len 0
uart:~$
MCE MNS 0x20005b00 send_event req, final false, data len 252
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 22
00000000: 78 2d 62 74 2f 4d 41 50 2d 65 76 65 6e 74 2d 72 |x-bt/MAP -event-r|
00000010: 65 70 6f 72 74 00 |eport. |
HI 4c Len 3
T 0f L 1
00000000: 00 |. |
HI 48 Len 211
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
uart:~$ map mce mns send_event noerror
MCE MNS 0x20005b00 send_event req, final true, data len 10
HI 49 Len 7
00000000: 65 70 6f 72 74 3e 00 |eport>. |
uart:~$ map mce mns send_event noerror
uart:~$
L2CAP Transport with SRM and SRMP
uart:~$ map mse mns send_event
Adding default application parameters:
Instance ID: 0
MSE MNS 0x20005d00 send_event rsp, rsp_code Continue, data len 4
HI 97 Len 1
OBEX SRM: 01
HI 98 Len 1
OBEX SRMP: 01
uart:~$ map mse mns send_event
MSE MNS 0x20005d00 send_event rsp, rsp_code Success, data len 0
uart:~$
MCE MNS 0x20005b00 send_event req, final false, data len 252
HI cb Len 4
Conn ID: 00000001
HI 97 Len 1
OBEX SRM: 01
HI 42 Len 22
00000000: 78 2d 62 74 2f 4d 41 50 2d 65 76 65 6e 74 2d 72 |x-bt/MAP -event-r|
00000010: 65 70 6f 72 74 00 |eport. |
HI 4c Len 3
T 0f L 1
00000000: 00 |. |
HI 48 Len 211
00000000: 3c 3f 78 6d 6c 20 76 65 72 73 69 6f 6e 3d 27 31 |<?xml ve rsion='1|
00000010: 2e 30 27 20 65 6e 63 6f 64 69 6e 67 3d 27 75 74 |.0' enco ding='ut|
...
uart:~$ map mce mns send_event noerror srmp
MCE MNS 0x20005b00 send_event req, final true, data len 10
HI 49 Len 7
00000000: 65 70 6f 72 74 3e 00 |eport>. |
uart:~$ map mce mns send_event noerror
uart:~$
应用参数
MAP shell 提供用于向请求添加应用参数的命令。必须先添加这些参数，然后再发送相应的操作命令。
添加应用参数
可以使用 map add_header app_param 命令添加应用参数：
uart:~$ map add_header app_param max_list_count 10
Added MaxListCount: 10
uart:~$ map add_header app_param list_start_offset 0
Added ListStartOffset: 0
uart:~$ map add_header app_param charset utf8
Added Charset: utf8 (1)
uart:~$
列出应用参数
查看所有已添加的应用参数：
uart:~$ map add_header app_param list
Added application parameters (3):
[0] Tag=0x01, Len=2
00000000: 00 0a |.. |
[1] Tag=0x02, Len=2
00000000: 00 00 |.. |
[2] Tag=0x14, Len=1
00000000: 01 |. |
uart:~$
清除应用参数
清除所有已添加的应用参数：
uart:~$ map add_header app_param clear
Cleared all application parameters
uart:~$
示例：带过滤器获取消息列表
uart:~$ map add_header app_param max_list_count 10
Added MaxListCount: 10
uart:~$ map add_header app_param filter_msg_type 1f
Added FilterMessageType: 0x1f
EMAIL=Y, SMS_GSM=Y, SMS_CDMA=Y, MMS=Y, IM=Y
uart:~$ map add_header app_param filter_read_status unread
Added FilterReadStatus: unread (1)
uart:~$ map mce mas get_msg_listing
MCE MAS 0x20005a00 get_msg_listing rsp, rsp_code Continue, data len 252
...
uart:~$ map add_header app_param clear
Cleared all application parameters
uart:~$
附加信息
RFCOMM 与 L2CAP 传输
RFCOMM Transport
对于 GET 或 PUT 操作，必须多次调用同一个 shell 命令，直到完整消息被传送完毕。
L2CAP Transport with SRM
启用 SRM（单响应模式）后，GET 请求无需重复发送，服务器会发送所有响应数据包。对于 PUT 操作，客户端发送所有请求数据包，无需等待中间响应；服务器在收到最后一个 PUT 请求后发送单个响应。
L2CAP Transport with SRM and SRMP
同时启用 SRM 和 SRMP（单响应模式参数）后，需要继续发送 GET 请求和 PUT 响应，直到 SRMP 被禁用。
SRM（单响应模式）
在 L2CAP 传输（GOEP v2.0）上会自动启用 SRM。
GET 操作
当为 GET 操作启用 SRM 时：
客户端发送单个 GET 请求。
服务器发送多个响应数据包，无需等待其他请求。
可以使用
srmp参数控制流（等待下一个请求）。
PUT 操作
当为 PUT 操作启用 SRM 时：
客户端发送多个 PUT 请求，无需等待其他响应。
服务器在收到最后一个 PUT 请求时发送单个 PUT 响应。
可以使用
srmp参数控制流（等待下一个响应）。
多实例支持
MAP shell 支持多个 MAS 实例：
MCE 可以同时连接到多个 MSE MAS 实例
MSE 可以注册多个具有不同实例 ID 的 MAS 实例
使用
select命令在实例之间切换
uart:~$ map mce mas select 0
Selected MCE MAS instance_id 0 as default
uart:~$