Flash

概述

烧录偏移量概念

用户 API 使用的偏移量以烧录存储器的起始地址为基准。对于所有可通过页面布局查询 API 获取布局的烧录控制器常规存储区域，均应遵循此规则（参见 CONFIG_FLASH_PAGE_LAYOUT ）。

供应商专用的烧录存储器特殊用途区域可不受此规则约束（此类区域显然无法由页面布局查询 API 涵盖）。

Related code samples

Ambiq MSPI timing scanFind the appropriate timing for a given device on a given board.
AT45 DataFlash driverUse the AT45 family DataFlash driver to interact with the flash memory over SPI.
Flash shellExplore a flash device using shell commands.
JEDEC MSPI-NOR flashUse the flash API to interact with an MSPI NOR serial flash memory device.
JEDEC SPI-NOR flashUse the flash API to interact with an SPI NOR serial flash memory device.
JESD216 flashUse the JESD216 flash API to extract information from a compatible serial memory device.
Memory-Mapped FlashWrite data into the storage partition and read it using flash API and memory-mapped pointer.
Nordic flash write during Bluetooth LE activityWrite to flash while the Bluetooth LE radio is active.
nRF SoC Internal StorageUse the flash API to interact with the SoC flash.
RW612 PM flash checkCheck external NOR flash health across RW612 low-power modes.